A
-
Abasipour, Mina
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Abbaspour-Fard, Mohammad Hossein
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Abdeali, Golnoosh
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
-
Abdollahi, Mahdi
Radical Copolymerization of Vinylimidazole and
Vinylphosphonic Acid: Sequence Distribution-Glass Transition Temperature Relationship in Copolymers [Volume 32, Issue 6, 2020, Pages 521-534]
-
Afkhami Aqda, Mohammad Reza
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Aghaei, Mahdi
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Ahmadi, Hamed
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Akhtari, Saeede
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Alahyarizadeh, Ghasem
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Alimardani, Mohammad
Evaluation of Fatigue Crack Growh Resistance of
Rubber-Silica Composites and Analysis of the Role of Filler-Filler Interaction and Interface Bonding [Volume 32, Issue 5, 2020, Pages 397-409]
-
Amini, Golchehr
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
-
Amiri Amraie, Iraj
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Arab, Behroz
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Ashenagar, Samaneh
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Azadi, Nasim
Effects of Adding Nanosilica on Acrylic and Siloxane Hydrophobic Coatings to Protect Calcite Stones [Volume 32, Issue 1, 2019, Pages 15-29]
B
-
Babanzadeh, Samal
Synthesis, Characterization, and Properties of Novel Aromatic UV Absorber Polyamides [Volume 32, Issue 4, 2019, Pages 327-337]
-
Bahramian, Ahmad Reza
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
-
Bakeri Jafarkolaei, Gholamreza
Dehumidification of Gas Stream Using Nanostructured Polyetherimide Hollow Fiber Membrane in Membrane Contactor [Volume 32, Issue 5, 2020, Pages 373-384]
-
Boddohi, Soheil
Preparation and Investigation of Gum Tragacanth/Gelatin Nanofibers for Antibacterial Drug Delivery Systems [Volume 32, Issue 2, 2019, Pages 145-155]
-
Buohendi, Hossien
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
D
-
Daraei Nejad, Zohreh
Conductive Nanofibrous Scaffolds for Tissue Engineering Applications: A Review [Volume 32, Issue 3, 2019, Pages 189-210]
E
-
Ehsani, Morteza
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ehsani Namin, Parvin
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ehsani Namin, Parvin
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
-
Ershad-Langroudi, Amir
Effects of Adding Nanosilica on Acrylic and Siloxane Hydrophobic Coatings to Protect Calcite Stones [Volume 32, Issue 1, 2019, Pages 15-29]
-
Eshagh, Sahar
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Etemadi, Habib
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
F
-
Faraji, Samaneh
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Farhadbeigi, Navid
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Farnaz Sadat, Fattahi
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Farrokhi, Mojtaba
Radical Copolymerization of Vinylimidazole and
Vinylphosphonic Acid: Sequence Distribution-Glass Transition Temperature Relationship in Copolymers [Volume 32, Issue 6, 2020, Pages 521-534]
-
Fatahi, Hasan
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
G
-
Garoosi, Keyvan
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Ghaffarian, Seyed Reza
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Ghasemi, Ismaeil
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ghasemi, Ismaeil
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
-
Ghodratpour, Faezeh
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
-
Ghoreishy, Mir Hamid Reza
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Gomari, Sepideh
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
H
-
Haddadi, Vahid
Effect of Concentration and Size of Crumb Rubber on Rheological and Flexibility Properties of Bitumen [Volume 32, Issue 6, 2020, Pages 475-483]
-
Hassanajili, Shadi
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Heidari, Amin
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Heyran Ardakani, Hamid Reza
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Hosseini, Fereshteh
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Hosseini, Seyed Mostaffa
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
J
-
Jafari, Farid
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Jahani, Mehran
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
-
Jalilian, Mehrdad
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Jalilian, Seyed mehrdad
Polymerization Parameters of Methacrylic Acid Esters as Viscosity Index Improvers in Lubricants [Volume 32, Issue 2, 2019, Pages 123-134]
-
Jalilian, Seyed Mehrdad
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Jamali Firouzabadi, Vahide
Triple Stimuli Responsive Poly(vinyl alcohol)Chitosan/Nanoclay/Nanosilver Nanocomposite Hydrogel [Volume 32, Issue 1, 2019, Pages 3-14]
-
Jozaghkar, Mohammad Reza
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Jozaghkar, Mohammad Reza
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
K
-
Kabiri, Kourosh
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
-
Karimi, Mohammad
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
-
Kazemi, Mojtaba
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Keshavarz Mirza-Mohamadi, Hasan
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Khajavi, Ramin
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Khajeh-Amiri, Alireza
Fabrication of Electrospun Fibers Containing Ternary Eutectic Fatty Acid Mixture as Phase-Change Materials for Application in Textiles [Volume 32, Issue 2, 2019, Pages 135-143]
-
Khalaj, Ebrahim
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
-
Khamforoush, Mehrdad
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
-
Khoddami, Akbar
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Khosravi, Yasamin
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Kokabi, Mehrdad
Triple Stimuli Responsive Poly(vinyl alcohol)Chitosan/Nanoclay/Nanosilver Nanocomposite Hydrogel [Volume 32, Issue 1, 2019, Pages 3-14]
L
-
Liaghat, Gholamhossein
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Liaghat4, Golamhossein
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
M
-
Meghdadi Kasani, Rashid
Preparation and Investigation of Gum Tragacanth/Gelatin Nanofibers for Antibacterial Drug Delivery Systems [Volume 32, Issue 2, 2019, Pages 145-155]
-
Mehdipour–Ataei, Shahram
Synthesis, Characterization, and Properties of Novel Aromatic UV Absorber Polyamides [Volume 32, Issue 4, 2019, Pages 327-337]
-
Minuchehr, Abdol Hamid
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Mohamadpour Gorgi, Abolghasem
Dehumidification of Gas Stream Using Nanostructured Polyetherimide Hollow Fiber Membrane in Membrane Contactor [Volume 32, Issue 5, 2020, Pages 373-384]
-
Mohammadi, Mohsen
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
-
Montazer, Majid
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Moradi, Ayub
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
-
Mortazaei, Mehrzad
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Mortezaeei, Mehrzad
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
-
Moslemin, Mohammad Hosein
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
N
-
Naderi, Ghasem
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Nateghi-Boroujeni, Iman
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Navid Famili, Mohamad Hossein
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
P
-
Pourhossaini, Mohammad Reza
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
Q
-
Qasemifard, Mahmoud
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
R
-
Rahmatinejad, Jalal
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Rashidi, Abu Saeed
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Razaghian, Farhad
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Razavi, Morteza
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Razavi-Nouri, Mohammad
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Razzaghi-Kashani, Mehdi
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Razzaghi-Kashani, Mehdi
Evaluation of Fatigue Crack Growh Resistance of
Rubber-Silica Composites and Analysis of the Role of Filler-Filler Interaction and Interface Bonding [Volume 32, Issue 5, 2020, Pages 397-409]
-
Rezadoust, Amir Masood
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Rezaei, Mostafa
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Rozrokh, Kamil
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
S
-
Salimian, Sadaf
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Samaei, Sedigheh
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Shabani, Iman
Conductive Nanofibrous Scaffolds for Tissue Engineering Applications: A Review [Volume 32, Issue 3, 2019, Pages 189-210]
-
Shayesteh, Massod
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Shiva, Mehdi
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Shoeyb, Zahra
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Shokri, Elham
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Sobhani, Hadi
Wollastonite as a Suitable Alternative to Glass Fibers in Acrylonitrile-Butadiene-Styrene Composites [Volume 32, Issue 6, 2020, Pages 509-519]
-
Soheilpour, Zahra
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Soleimani, Neda
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
T
-
Tabasizadeh, Mohammad
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Tabatabaee Ghomi, Mohammad
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Tabatabaei, Masumeh
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Taheri-Behrooz, Fatollah
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Talebi, Saeid
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
Y
-
Yaghobi, Nakisa
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Yazdanshenas, Mohamad Ismail
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Yegani, Reza
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Yousefi, Ali Akbar
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
Z
-
Zargoosh, Mojtaba
Wollastonite as a Suitable Alternative to Glass Fibers in Acrylonitrile-Butadiene-Styrene Composites [Volume 32, Issue 6, 2020, Pages 509-519]
-
Ziaee, Farshid
Polymerization Parameters of Methacrylic Acid Esters as Viscosity Index Improvers in Lubricants [Volume 32, Issue 2, 2019, Pages 123-134]
-
Ziaee, Farshid
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Zibaseresht, Ramin
Fabrication of Electrospun Fibers Containing Ternary Eutectic Fatty Acid Mixture as Phase-Change Materials for Application in Textiles [Volume 32, Issue 2, 2019, Pages 135-143]
-
Zokaee Ashtiani, Farzin
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
Your query does not match with any item